Toro ProLine H800, Инструкции по установке

Страница: 4 / 8

g315989
Figure 3
1. Long bolt 5. Locknut
2. Flat washer
6. Spacer
3. Flange nut 7. Hook
4. Spring
2. Install the rod connector to the hook with a
long bolt, flat washer, bushing, flange nut, and
locknut (
Figure 4 ).
Note:
Ensure that the locknut is not fully
installed onto the bolt. The space between the
flange nut and locknut is used for the spring
(
Figure 6 ).
3. Install the rod connector to the hook with a short
bolt, flat washer, bushing, and locknut. (
Figure
4 ).
g315987
Figure 4
1. Long bolt 5. Flange nut
2. Flat washer 6. Locknut
3. Rod connector
7. Short bolt
4. Bushing
4. Check the gap between the hook and the closed
hopper door. Ensure that the gap is 2 mm (1/16
inch) and adjust if necessary (
Figure 5 ).
g316170
Figure 5
1. 2 mm (1/16 inch) gap
5. Install the spring ends as shown in Figure 6 .
4