Toro ProForce Debris, Руководство по обслуживанию

Страница: 15 / 80

PRELIMINARY – For Toro Distributor
and Toro Company
use only.
ProForce Debris Blower Page 2 − 5 Product Records and Maintenance
Standard Torque for Dry, Zinc Plated and Steel Fasteners (Metric Fasteners)
Thread Size
Class 8.8 Bolts, Screws and Studs with
Regular Height Nuts
Class 10.9 Bolts, Screws and Studs with
Regular Height Nuts Thread Size Regular Height Nuts
(Class 8 or Stronger Nuts)
Regular Height Nuts
(Class 10 or Stronger Nuts)
M5 X 0.8 57 + 5 in − lb 640 + 60 N − cm 78 + 7 in − lb 885 + 80 N − cm
M6 X 1.0 96 + 9 in − lb 1018 + 100 N − cm 133 + 13 in − lb 1500 + 150 N − cm
M8 X 1.25 19 + 2 ft − lb 26 + 3 N − m 27 + 2 ft − lb 36 + 3 N − m
M10 X 1.5 38 + 4 ft − lb 52 + 5 N − m 53 + 5 ft − lb 72 + 7 N − m
M12 X 1.75 66 + 7 ft − lb 90 + 10 N − m 92 + 9 ft − lb 125 + 12 N − m
M16 X 2.0 166 + 15 ft − lb 225 + 20 N − m 229 + 22 ft − lb 310 + 30 N − m
M20 X 2.5 325 + 33 ft − lb 440 + 45 N − m 450 + 37 ft − lb 610 + 50 N − m
NOTE: Reduce torque values listed in the table above
by 25% for lubricated fasteners. Lubricated fasteners
are defined as threads coated with a lubricant such as
oil, graphite or thread sealant such as Loctite.
NOTE: Torque values may have to be reduced when
installing fasteners into threaded aluminum or brass.
The specific torque value should be determined based
on the fastener size, the aluminum or base material
strength, length of thread engagement, etc.
NOTE: The nominal torque values listed above are
based on 75% of the minimum proof load specified in
SAE J1199. The tolerance is approxi 10% of the
nominal torque value.