Toro PowerPlex Series, Руководство оператора

Страница: 9 / 12

To adjust the air speed as you blow, use the
variable-speed trigger (
Figure 4 ).
To maintain the current air speed, engage the speed
lock (
Figure 4 ).
Shutting Off the Blower
To shut off the blower, disengage the speed lock (if in
use) and release the variable-speed trigger (
Figure 4 ).
Important:
After stopping the blower, do not
leave the speed lock engaged with the battery
pack in the blower.
Whenever you are not using the blower or are
transporting the blower to or from the work area,
remove the battery pack.
Removing the Blower Tube
Press down on the tab to separate the blower tube
from the blower (
Figure 5 ).
g228499
Figure 5
1. Tab
Removing the Battery from
the Blower
Press down on the battery latch to separate the
battery from the blower (
Figure 6 ).
g194150
Figure 6
1. Battery latch
Using the Attachments
Use the provided attachments as needed.
Note:
The Gutter Cleaner Kit (Model 51667) and
Oscillating Tube (Model 51764) are sold separately.
g244381
Figure 7
1. Gutter cleaner adaptor 3. Oscillator/MPH insert
adapter
2. Blower tube 4. MPH insert
Charging the Battery Pack
Important:
Read all safety precautions.
Important:
Charge the battery pack only in
temperatures that are within the appropriate
range; refer to
Specifications (page 8) .
Note:
At any time, press the battery-charge-indicator
button on the battery pack to display the current
charge (LED indicators).
1. Plug the power cord that matches your power
outlets into the battery charger.
2. Make sure that the vents on the battery are clear
of any dust and debris.
3. Line up the cavity in the battery pack ( Figure 8 )
with the tongue on the charger.
g244370
Figure 8
1. Battery pack cavity 4. Battery-charge-indicator
button
2. Battery pack terminals 5. LED indicators (current
charge)
3. Battery pack venting areas
9