•
Perform only those maintenance instructions described
in this manual. Before performing any maintenance,
service, or adjustment, stop the engine, remove the key,
and disconnect the wire from the spark plug. If major
repairs are ever needed, contact an Authorized Service
Dealer.
•
Do not change the governor settings on the engine.
•
When storing the snowthrower for more than 30 days,
drain the fuel from the fuel tank to prevent a potential
hazard. Store fuel in an approved fuel container.
Remove the key from the ignition switch before storing
the snowthrower.
•
Purchase only genuine Toro replacement parts and
accessories.
Sound Pressure
This unit has a maximum sound pressure level at the
operator’s ear of 92 dBA, based on measurements of
identical machines per EN 11201.
Sound Power
This unit has a guaranteed sound power level of 108 dBA,
based on measurements of identical machines per EN 3744.
Vibration
This unit does not exceed a hand/arm vibration level of
7.0 m/s
2
, based on measurements of identical machines
per EN 1033.
Safety and Instructional Decals
Important:
Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
106-4525
Reorder part no. 112-6633
1. Fast
3. Slow
2. Forward speeds
4. Reverse speeds
107-3040
1. Cutting dismemberment, impeller and cutting dismemberment,
auger hazards—keep bystanders a safe distance from the
snowthrower.
112-6625
Reorder part no. 112-6629
1. Cutting/dismemberment hazard, impeller—do not place your
hand in the chute; stop the engine before leaving the operator’s
position, use the tool to clear the chute.
4
