Toro Multi Pro 1750, Руководство оператора

Страница: 59 / 76

Removing the
Rate-Control-Manifold Valve
1. Remove the clamps and gaskets that secure the
manifold for the rate-control valve (
Figure 62 ).
Note:
Retain the clamp(s) and gasket(s) for
installation in Installing the Rate Control Manifold
Valve (page 64) .
g033304
Figure 62
1. Flange (pressure-filter
head) 4. Clamp
2. Manifold (rate-control
valve) 5. Gasket
3. Flange (agitation valve) 6. 3-pin connector (valve
actuator—rate-control
valve)
2. Remove the retainer that secures the outlet
fitting to the manifold for the rate-control valve
(
Figure 63 ).
g033313
Figure 63
1. Flanged-head bolt 4. Retainer
2. Valve mount 5. Socket (outlet fitting)
3. Flanged locknut 6. Manifold-valve assembly
3. Remove the 2 flanged-head bolts and 2 flanged
locknuts that secure the rate-control valve to
the valve mount and remove the valve manifold
from the machine (
Figure 63 ).
Note:
If necessary, loosened the mounting
hardware for the pressure-filter head to ease
removal of the rate-control valve.
Removing the Agitation-Manifold
Valve
1. Remove the clamps and gaskets that secure
the manifold for the agitation valve (
Figure
64 ) to the agitation-bypass valve, rate-control
valve, master-section valve, and adapter fitting
(agitation-throttle valve).
Note:
Retain the clamp(s) and gasket(s) for
installation in Installing the Agitation-Manifold
Valve (page 64) .
2. Remove the retainer that secures the outlet
fitting to the manifold for the agitation valve
(
Figure 64 ).
59