2004—The Toro Company
8111 Lyndale Ave., Bloomington, MN 55420, USA
Printed in China
All Rights Reserved
Original Instructions (EN)
Register your product at www.Toro.com
Leaf Cart
Model No. 51612—Serial No. 240000001 and Up
Form No. 3352-188
Operator’s Manual
Setup
Loose Parts
Part
Qty.
Push nut
2
Push nut tool
1
Wheel
2
Axle assembly
1
Carriage bolt
8
Locknut
8
Front bag frame
1
Rear bag frame
1
Bag
1
Vacuum hose
1
Adapter
1
Note: You will need a hammer and a 7/16 inch socket
or wrench to perform this procedure.
Assembling the Leaf Cart
1.
Place a wheel over
the end of the axle and,
using a hammer and the
supplied push nut
tool (A), tap a push nut
onto the end of the axle.
2.
Turn the axle over
and repeat step 1 for the
other wheel.
m-6928
A
3.
Slide the front bag frame into the axle assembly
and secure it using 4 carriage bolts and locknuts.
m-6929
4.
Install the rear bag frame onto the front frame
using 4 carriage bolts and locknuts.
m-6930
5.
Press the end of the
vacuum hose into the
opening in the bag.
m-6931
