Special Features
This position has three functions. In this position, you may
Erase
all programmed information,
Review
all Programmed information, or activate a Rain
Sensor
.
Program Review
You can review the contents of programs
A
,
B
, and
C
by setting the dial to the
Special
Features
position. The display will show “
Review
”. Pressing the
+
button will begin the
program review. The display will scroll through the contents of the selected program. The items
displayed include the seasonal adjustment %, the start times selected, the valves selected, the
valve run times, and the active watering days. By moving the program selector switch, each
program can be reviewed in turn. You can press and hold the
+
button to speed up the review
and the
–
button to slow down the review.
Erase Program Information
Use this to erase program information.
Note:
When new from the factory, a default program has been installed in program
A
to
water all valves for 10 minutes every day at 4:00 a.m.
1.
Set the dial to
Special Features
.
2.
Select Program
A
,
B
, or
C
using the program selection switch.
3.
Press the
Next
button until
Erase
is displayed.
4.
Press the
+
button and display will show
Confirm
.
5.
Press the
+
button again, and the display will show
Done
.
6.
The program is completely blank, allowing you to program Lawn Master using the
instructions on the previous pages.
13
