Toro Hydroject 3000, Руководство по устранению неисправностей

Страница: 11 / 84

TORO Hydroject® 3000/4000 Components
NOTES
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
9
Hydrostatic Pump (3000 Hydroject® Only)
The Sundstrand, series 70 hydrostatic pump, is belt driven and provides variable oil flow to operate the traction
wheel motor, the traction bail, located on the tiller handle, is connected to the swash plate in the hydrostatic
pump and provides speed and directional control. The unit aerates in both directions.
NOTE: There is a bypass valve located on top of the hydrostatic pump, this valve provides for limited
movement of the unit with the engine off.
Cam Gear Box
The cam gearbox operates the cycling valve and also serves as the hydrostatic oil reservoir, on the
Hydroject® 3000.
The hydrostatic transmission uses 5 quarts of DTE 26.
NOTE: The oil level can be checked through the sight glass on the side of the reservoir.