Toro Groundsmaster 7200 Series, Руководство оператора

Страница: 46 / 72

3. Disengage the PTO, move the motion control
levers to the neutral locked position and set
the parking brake.
4. Move the throttle lever to the Slow position,
stop the engine, remove the key, and wait for
all moving parts to stop before leaving the
operating position.
5. Lift the footrest, exposing the top of the
mower deck.
6. Remove the dipstick/fill plug from the top of
the gear box (Figure 41) and make sure that the
lubricant is between the marks on the dipstick.
Figure 41
1. Fill plug and dipstick
7. If the lubricant level is low, add enough
lubricant until the level is between the marks
on the dipstick.
Note:
Do not over fill or the gearbox may
be damaged.
Changing the Mower Deck Gear Box
Lubricant
1. Position the machine and cutting unit on a
level surface.
2. Lower the mower deck to the 1 inch (2.5 cm)
height-of-cut.
3. Disengage the PTO, move the motion control
levers to the neutral locked position and set
the parking brake.
4. Move the throttle lever to the Slow position,
stop the engine, remove the key, and wait for
all moving parts to stop before leaving the
operating position.
5. Lift the footrest, exposing the top of the
mower deck.
6. Remove the dipstick/fill plug from the top of
the gear box (Figure 41).
7. Place a funnel and drain pan under the drain
plug located under the front of the gear box
and remove the plug, draining the lubricant
into the pan.
8. Replace the drain plug.
9. Add enough lubricant, approximately 12 oz
(283 ml), until the level is between the marks
on the dipstick.
Note:
Do not over fill or the gearbox may
be damaged.
Engine Maintenance
Air Cleaner Maintenance
• Check the air cleaner body for damage which
could possibly cause an air leak. Replace a
damaged air cleaner body. Check the whole
clean air intake system for leaks, damage, or
loose hose clamps.
• Service the air cleaner filter when the air
cleaner indicator (Figure 42) shows red or
every 400 hours (more frequently in extremely
dusty or dirty conditions). Do not over service
the air filter.
46