Adjusting Procedure for GreensPro 1260 (continued)
g271901
Figure 28
GreensPro 1260
1.
Traction cable
3.
Jam nut (2 each)
2.
Pedal rod pivot assembly
4.
Pedal stop bolts (2 each)
5. Start the engine and set the throttle to full engine speed.
6. If the drive roller does not rotate, shut off the engine and attach the traction
cable to the pedal rod pivot.
7. If the drive roller rotates, note the direction of drive roller rotation, then shut
off the engine and adjust the transmission control arm assembly as follows
(
):
A. Loosen the RTN (Return To Neutral) adjustment screw until the control
arm assembly can be rotated.
GreensPro
™
1240/1260
Page 5–33
Hydraulic System: Adjustments
14211SL Rev A
Содержание GreensPro 1240
