Toro Flex 08762, Руководство по установке

Страница: 1 / 8

Form No. 3394-565 Rev B
Flex ™ Groomer Kit
QAS Nail Drag for Sand Pro ® /Infield Pro ® 3040 or 5040 Traction
Unit
Model No. 08762—Serial No. 314000001 and Up
Installation Instructions
Introduction
This product complies with all relevant European
directives. For details, please see the separate
product specific Declaration of Conformity (DOC)
sheet.
You may contact Toro directly at www.Toro.com
for product safety and operation training materials,
accessory information, help finding a dealer, or to
register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
Figure
1 illustrates the location of the model and serial
numbers on the product. Write the numbers in the
space provided.
g026745
Figure 1
1. Location of the model and serial numbers
Model No.
Serial No.
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description Qty. Use
Nail-drag bracket 1
Spring bracket assembly 2
Carriage bolt (3/8 inch) 12
Locknut (3/8 inch) 12
Bolt (1/2 x 1 inch) 1
Locknut (1/2 inch) 1
Groomer 1
Side guard
2
Screw (1/4 x 1-3/4 inches) 4
Locknut (1/4 inch) 4
Install the groomer onto the nail drag.
© 2018—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3394-565* B