2
G025386
2
1
1
Figure 10
1.
Joints
2.
Short roller tube
11.
Connect each of the 2 springs to the appropriate
steering head, using the hardware previously removed;
refer to Figure 11.
Note:
Keep part of the shank on each bolt exposed.
Figure 11
1.
Bolt
4.
Nut
2.
Washers
5.
Spring
3.
Locknut
6.
Exposed shank
12.
Place the machine on the ground, and ensure that
the front and rear rollers are parallel within 2 mm
(5/64 inch) across the length of the rollers by laying a
straightedge across the front of the rollers (Figure 12).
Figure 12
1.
Straightedge
3.
Rear roller assembly
2.
Front roller assembly
Figure 13
1.
Jam nut
2.
Threaded rod
13.
Adjust the steering rod lengths as necessary (Figure 13).
Note:
The steering rods have a turnbuckle design,
with 1 rod end having left-hand threads and the other
rod end having right-hand threads. To adjust each
steering rod, loosen the jam nuts, turn the threaded rod
in the appropriate direction, and then tighten the jam
nuts to secure the adjustment.
4
