Form No. 3386-959 Rev A
Roller Mount Kit
GreensPro
™
1200 Greens Roller
Model No. 131-1619
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
No parts required
–
Prepare the machine.
Roller support
2
Bolt (M10 x 35 mm)
8
Grommet
2
Bolt (M10 x 40 mm)
8
Locknut (M10)
16
Washer (M10)
16
Install the kit.
Preparing the Machine
1.
Remove the roller cylinders from the steering heads.
Note:
Retain all of the hardware for later installation.
Figure 1
1.
Bolt (spring)
5.
Roller cylinder
2.
Nut
6.
Washer (roller)
3.
Washer (spring)
7.
Split washer
4.
Locknut
8.
Bolt (roller)
2.
Remove the bolts, the nuts, and the washers securing
the springs to each steering head.
3.
Remove the steering heads from the machine as shown
in Figure 2.
Note:
Retain the washers and the steering roller
assemblies. Discard the nuts and the bolts.
Figure 2
1.
Washer (16)—retain
3.
Steering heads
2.
Nut (8)—discard
4.
Bolt (8)—discard
© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the UK
All Rights Reserved
*3386-959* A
