Toro Greensmaster 2600, Руководство оператора

Страница: 1 / 20

Form No. 3381-649 Rev D
HoverPro 400 Machine
Model No. 02600—Serial No. 314000001 and Up
Operator's Manual
Introduction
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely. Keep for future reference.
You may contact Toro directly at www.Toro.com for product
and accessory information, help finding a dealer, or to register
your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready. Figure 1 identifies the location of the
model and serial numbers on the product.
1
g017415
Figure 1
1. Model and serial number plate
Write the product model and serial numbers in the space
below:
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 2),
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
Figure 2
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
For models with stated engine horsepower, the gross
horsepower of the engine was laboratory rated by the engine
manufacturer in accordance with SAE J1349. As configured
to meet safety, emission, and operating requirements, the
actual engine horsepower on this class machine will be
significantly lower.
Contents
Introduction .................................................................. 1
Safety ........................................................................... 2
General Operation .................................................. 2
Slope Operation ...................................................... 2
Children................................................................. 2
Service ................................................................... 3
Sound Pressure ....................................................... 4
Sound Power .......................................................... 4
Vibration................................................................ 4
Safety and Instructional Decals ................................. 5
Setup ............................................................................ 6
1 Assembling the Handle .......................................... 6
2 Filling the Engine with Oil...................................... 6
Product Overview .......................................................... 7
Specifications ......................................................... 8
Operation ..................................................................... 8
Filling the Fuel Tank ................................................ 8
Checking the Engine Oil Level .................................. 9
Adjusting the Cutting Height....................................10
Starting the Engine .................................................10
Stopping the Engine ...............................................11
Hauling .................................................................11
Operating Tips ......................................................11
Maintenance .................................................................12
Recommended Maintenance Schedule(s) ......................12
© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN)
Printed in the UK
All Rights Reserved
*3381-649* D