Toro Greensmaster 2600, Руководство оператора

Страница: 7 / 20

g017530
Figure 5
1. The oil level is at its
maximum. 3. The oil level is too
low—add oil to the
crankcase.
2. The oil level is too
high—remove oil from
the crankcase.
3. Slowly pour oil into the oil fill hole, wait 3 minutes,
and check the oil level on the dipstick by wiping the
dipstick clean and then inserting,
but not screwing in,
the oil fill cap into the hole (Figure 6).
g017532
Figure 6
Note:
Fill the engine crankcase with oil until the
dipstick indicates that the engine oil level is correct
as shown in Figure 5. If you overfill the engine with
oil, remove the excess oil as directed in Changing the
Engine Oil.
4. Install the dipstick and hand tighten it securely.
Important:
Change the engine oil after the first 5
operating hours; change it yearly thereafter. Refer
to Changing the Engine Oil.
Product Overview
Figure 7
1. Handle 4. Handlebar securing knob
2. Engine stop handle 5. Footstop
3. Switch box
g017377
1
2
3
4
5
6
7
8
9
10
11
Figure 8
1. Spark plug 7. Fuel cap vent knob
2. Exhaust guard 8. Fuel cap
3. Exhaust 9. Choke lever
4. Dipstick 10. Air cleaner
5. Finger guard
11. Carburetor
6. Starter grip
7