Lubrication
Greasing the Machine
Service Interval:
Every 25 hours
Lubricate the 13 grease fittings on the mower using
a No. 2 multipurpose lithium base grease. A hand
operated grease gun is recommended for best results.
The grease fitting locations are as follows:
•
2 on the front roller (Figure 14)
•
2 on the reel bearings (Figure 14)
•
2 on the drum axles (Figure 15)
•
3 on the differential (Figure 15)
•
2 on the reel countershaft bearings (Figure 16)
•
2 on the belt idler pivots (Figure 17).
1. Wipe each grease fitting with a clean rag.
2. Pump grease into each fitting until it begins to get
difficult to pump the gun.
Important:
Do not apply too much pressure or
grease seals will become permanently damaged.
3. Wipe off excess grease.
Figure 14
Figure 15
Figure 16
Figure 17
19
Содержание GREENSMASTER 1000
Страница 34: ...Notes 34...
Страница 35: ...Notes 35...
