background image

©

1999 The Toro Company, Irrigation Division

Form Number 373-0063  Rev. A

Domestic: 

This equipment has been tested and found to

comply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harm-
ful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does harmful interference to radio or television
reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct
the interference by one or more of the following mea-
sures:

Electromagnetic Compatibility

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and

receiver.

3. Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV techni-

cian for help.

The user may find the following booklet prepared by the
Federal Communications Commission helpful:

How To Identify and Resolve Radio-TV Interference

Problems

. This booklet is available from the U.S. Gov-

ernment Printing Office, Washington, DC 20402. Stock
No. 004-000-00345-4.

International

: This is a CSPR 22 Class B product.

Содержание Green Keeper 212





































Отзывы: