Toro Grandstand 78524 Скачать руководство пользователя страница 4

Become familiar with the safe operation of the
equipment, with the operator controls, and safety
signs.

Use extra care with grass catchers or other
attachments. These can change the operating
characteristics and the stability of the machine.

Follow the recommendations for adding or
removing weights as described in the

Operator’s

Manual

for the machine.

Do not use a grass catcher on steep slopes. A
heavy grass catcher could cause loss of control
or overturn the machine.

Slow down and use extra care on hillsides. Mow
slopes side to side. Turf conditions can affect the
stability of the machine. Use extreme caution
while operating near drop-offs.

Keep all movement on slopes slow and gradual.
Do not make sudden changes in speed, directions,
or turning.

The grass catcher can obstruct the view to the
right. Use extra care when operating the machine
in reverse.

Use care when loading or unloading the machine
into a trailer or truck.

Never operate with the discharge deflector raised,
removed, or altered, unless you are using a grass
catcher.

Keep your hands and feet away from moving parts.
Do not make adjustments with the engine running.

Stop the machine on level ground, disengage
the drives, engage the parking brake, shut off
the engine, and remove the key before leaving
the operator's position for any reason including
emptying the grass catcher or unclogging the
chute.

Do not operate the machine without either the
entire grass catcher, the grass deflector, and/or
guard in place.

Shut off the engine and remove the key before
removing the grass catcher or unclogging the
chute.

Do not leave grass in the grass catcher for
extended periods of time.

Grass catcher components are subject to wear,
damage, and deterioration, which could expose
you to moving parts or thrown objects. Frequently
check components and replace them with
the manufacturer's recommended parts when
necessary.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.

decal133-8061

133-8061

LB
KG

LB
KG

136-4053

LB
KG

LB
KG

decal136-4053

136-4053

1.

Warning; loss of traction—do not operate only with
counterbalance weights installed; do not operate only with
the E-Z Vac installed; operate only with both the E-Z Vac
and counterbalance weights installed.

4

 

Содержание Grandstand 78524

























Отзывы: