Toro Grandstand 78524, Руководство оператора

Страница: 13 / 24

8
Installing the Bagger Tube
Parts needed for this procedure:
1 Hose (from the Blower and Drive Kit)
1 Hose clamp (from the Blower and Drive Kit)
Procedure
1. Thread 1 end of the hose into the hood 2 to 3
threads (
Figure 19 ).
g037657
Figure 19
1. Hose
2. Thread the hose clamp onto the other end of the
new hose 2 to 3 turns (
Figure 20 ).
g257568
Figure 20
1. Hose 3. Rubber latch
2. Hose clamp
3. Install the hose over the blower transition so
that the hose forms an approximately 90-degree
bend from the hood. Adjust the orientation of
the hose-clamp hooks as needed so that they
align with the rubber latches, and secure the
hose by stretching the rubber latches over the
hooks (
Figure 20 ).
Note:
Ensure the rubber latches are tight.
Thread the clamp further on the hose if the
latches are loose.
13