Product Overview
g308470
Figure 2
Left side of the machine shown.
1.
Blades
6.
Lock switch
2.
Guard
7.
Trigger
3.
Auxiliary-handle switch
8.
Battery latch
4.
Auxiliary handle
9.
Battery pack
5.
Handle-rotation button
10.
Protective cover
Specifications
Model
51855T
Cutting
Length
610 mm (24 inches)
Rated
Voltage
60V DC maximum, 54 VDC nominal usage
No-load
Speed
3200 spm at 60 VDC max
Cutting
width
19 mm (3/4 inch)
Charger
Type
81802
Battery Type
81825
Appropriate Temperature Ranges
Charge/store the battery pack
at
5°C (41°F) to 40°C (104°F)*
Use the battery pack at
-30°C (-22°F) to 49°C (120°F)*
Use the machine at
0°C (32°F) to 49°C (120°F)*
*Charging time will increase if you do not charge the
battery pack within this range.
Store the machine, battery pack, and battery charger
in an enclosed clean, dry area.
Operation
Starting the Hedge Trimmer
1.
Remove the protective cover from the blades
(
).
WARNING
The hedge trimmer blades can cause
cuts or amputation.
Be careful when handling the hedge
trimmer with the protective cover
removed.
g308414
Figure 3
1.
Protective cover
2.
Blades
2.
Make sure that the vents on the hedge trimmer
are clear of any dust and debris.
3.
Align the cavity of the battery pack with the
tongue in the handle housing, grasp the handle,
and push the battery pack into the handle until
the latch locks into place (
).
g308413
Figure 4
1.
Auxiliary-handle switch
4.
Trigger
2.
Auxiliary handle
5.
Battery latch
3.
Lock switch
6.
Hedge trimmer venting
areas
4.
Place 1 hand on the trigger handle. Place the
other hand on the auxiliary handle (
7
