Toro e-Dingo 500, Руководство оператора

Страница: 12 / 60

Removing Flooring
1. Fully tilt the attachment rearward and lower the
loader arms. Use this as the starting angle for
scraping the floor.
Note:
Using a scraper angle greater than 30
degrees can cause premature wear on the blade
and reduce visibility of the area being scraped.
g371242
Figure 7
2. Drive the traction unit forward to remove flooring.
3. As the blade edge wears, tilt the scraper
attachment in small increments as needed.
Note:
If the blade edge becomes dull,
manually rotate the blade-holder assembly 180
degrees to use a new edge. Use the starting
angle described in step
1 after rotating the
blade-holder assembly.
g371267
Figure 8
Transport Position
When transporting the attachment, keep it as close
to the ground as possible, no more than 15 cm (6
inches) above the ground. Tilt it rearward.
g371206
Figure 9
1. No more than 15 cm (6
inches) above the ground 2. Tilt the attachment
rearward.
10