Toro BU-003895, Руководство оператора

Страница: 17 / 28

9
Completing the Installation
No Parts Required
Procedure
1. Tilt the 4-in-1 bucket back and lower the loader
arm.
2. Shut off the engine and remove the key.
3. Check all hydraulic connections for leaks and
correct as necessary.
4. Check the hydraulic fluid level and correct as
necessary; refer to your machine
Operator’s
Manual .
5. Install the heat shield as shown in Figure 18 .
6. Close and secure the engine hood.
7. Install the valve manifold cover to the 4-in-1
bucket and secure it with the 4 bolts and
washers as shown in
Figure 24 .
Important:
The 4-in-1 bucket must not
be used without the valve manifold cover
installed. The warranty on the valve manifold
assembly will be voided if the cover is not
installed or installed incorrectly.
Product Overview
g242329
Figure 28
1. 4-in-1 bucket 3. Hydraulic and electrical
connections
2. Manifold cover 4. Loader arm/attachment tilt
lever
Controls
Become familiar with all the controls ( Figure 29 and
Figure 30 ) before you start the engine and operate
the traction unit.
Auxiliary Hydraulics Low Flow
Switch
Press on the front of the auxiliary hydraulics low flow
switch to turn it on.
g239507
Figure 29
1. Low flow switch
17