Toro 88713, Руководство оператора, Страница: 10 / 52

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description Qty. Use
No parts required
–
Install the harness.
Connecting the Attachment to the Power Head
1. Install the square shaft of the attachment into the square shaft of the power head (A of Figure 3 ).
2. Align the locking button on the lower shaft with the slotted hole on the upper shaft and slide the 2 shafts
together (B and C of
Figure 3 ).
3. The locking button clicks into the slotted hole when the shafts are secured (C of Figure 3 ).
4. Using the screw-handle, tighten the screw on the shaft connector until it is secure (D of Figure 3 ).
g358758
Figure 3
8