![Toro 79155 Скачать руководство пользователя страница 12](http://html.mh-extra.com/html/toro/79155/79155_operators-manual_1133455012.webp)
4. Install the bags by sliding the bag frame
hooks onto the retaining brackets
(Figure 12).
Figure 12
1. Screws
4. Nuts
2. Bagger mount assembly
5. Bagger hitch
3. Hood assembly
5. Lower the hood onto the bags. Then push
down on both bag retainer handles until
they lock on the bag frame.
Clearing Obstructions from
the Bagger
1. Move the motion control levers outward to
neutral position, disengage the power take
off (PTO), engage parking brake, stop the
engine, remove the key, and wait for all
moving parts to stop before leaving the
operating position.
2. Check the grass bags and empty them if
they are full.
3. Remove and separate the discharge tube
and chute from the bagger hood and
mower. Using a stick or similar object,
carefully remove and clear the obstruction
from the mower, discharge tube, chute,
and the hood.
4. After you remove the obstruction, install
the complete bagger system and resume
operation.
Removing the Bagger
An uncovered discharge opening will
allow objects to be thrown in
operator’s or bystander’s direction.
Also, contact with blade could occur.
Thrown objects or blade contact can
cause serious injury or kill you or
bystanders.
Never operate mower unless discharge
deflector, or entire grass collection
system, or mulch kit is installed.
1. Move the motion control levers outward to
neutral position, disengage the power take off
(PTO), engage parking brake, stop the
engine, remove the key, and wait for all
moving parts to stop before leaving the
operating position.
2. Unlatch the upper tube and the lower tube.
Remove the upper tube from the hood seal.
Operating the mower with the bagger
installed and the front weight removed
may cause loss of traction and
steering control or an unstable
condition which could result in injury
or death.
Install the bagger only when the front
weight is installed.
3. Remove the bagger mount bracket from the
deck and retain all hardware see Figure 9.
Note: The boot mount bracket does not have
to be removed from the deck.
12
Содержание 79155
Страница 6: ...Slope Chart 6 ...
Страница 19: ......