5
DESCRIPTION
USE
QTY.
Push Arms
Flat Washer 1-1/2 in. O.D. (38 mm)
Retaining Ring
2
2
2
Install push arms to carrier frame
Spring Assembly
Shoulder Bolt 3/8 in. x 7/8 in. (22 mm)
Locknut 3/8 in.
2
2
2
Install springs to carrier frame
Shoulder Bolt 3/8 in. x 7/8 in. (22 mm)
Locknut 3/8 in.
2
2
Install mower to traction unit
Operator’s Manual
Parts Catalog
1
1
Read before operating
Ordering parts
Remove Carrier Frame
1. Remove hairpin cotters and clevis pins from mower
hanger brackets and remove mower from carrier frame
(Fig. 2).
1
m-3199
3
2
Figure 2
1.
Mower Hanger Bracket
2.
Clevis Pin
3.
Hairpin Cotter
Install Grass Deflector
1. Locate the deflector mounts over the pivot brackets and
secure with 2 bolts (3/8–3-3/4 in. (95 mm), 2 springs
and 2 locknuts (3/8 in.). Make sure the straight ends of
the springs are positioned between the deflector mounts
and the grass deflector (Fig. 3).
2. Tighten the locknuts until they contact the pivot
brackets (Fig. 3).
Important
The grass deflector must be spring-loaded in
the down position. Lift the deflector up to test that it snaps
to the full down position.
2
5
1
4
m–2549
3
Figure 3
1.
Bolt, 3/8 x 3-3/4 in.
(95 mm)
2.
Deflector Mount
3.
Spring
4.
Pivot Bracket
5.
Locknut, 3/8 in.
