Toro 77292TE, Руководство оператора

Страница: 52 / 284

12. Install the belt covers and the bolts attached to
them (
Figure 63 ).
g027730
Figure 63
13. Install the sheet-metal guard; refer to Removing
the Sheet-Metal Guard (page 35) .
14. Tighten the bottom bolt holding the mower-deck
curtain to the mower deck; refer to
Releasing
the Mower-Deck Curtain (page 34) .
Replacing the
Hydraulic-Pump-Drive
Belt
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the mower belt; refer to Replacing the
Mower Belt (page 49) .
4. Raise the machine and support it with jack
stands.
5. Remove the clutch stop ( Figure 64 ).
g036860
Figure 64
1. Clutch stop
6. Remove the idler spring from the post ( Figure
65 ).
7. Remove the existing belt from the
hydraulic-pump-drive pulleys and the
engine pulley.
8. Install the new belt around the engine pulley and
the 2 hydraulic-pump pulleys (
Figure 65 ).
g036859
Figure 65
1. Idler pulley 4. Pump-drive belt
2. Idler-spring post 5. Right hydraulic-pump
pulley
3. Engine pulley 6. Left hydraulic-pump pulley
9. Install the clutch stop ( Figure 64 ).
10. Install the mower belt; refer to Belt Maintenance
(page 49) .
50