Toro 74920 TITAN ZX4820 Скачать руководство пользователя страница 6

Страница: 6 / 60

•

Follow the manufacturer's recommendations for wheel
weights or counterweights to improve stability.

•

Use extreme care with grass catchers or other attachments.
These can change the stability of the machine and cause
loss of control.

Using the Rollover Protection System
(ROPS)

•

Keep the roll bar in the raised and locked position and
use the seat belt when operating the machine.

•

Be certain that the seat belt can be released quickly in
the event of an emergency.

•

Be aware there is no rollover protection when the roll
bar is down.

•

Check the area to be mowed and never fold the ROPS in
areas where there are slopes, drop offs or water.

•

Lower the rollbar only when absolutely necessary. Do not
wear the seat belt with the roll bar folded down.

•

Check carefully for overhead clearances (i.e. branches,
doorways, electrical wires) before driving under any
objects and do not contact them.

Model 74920

Sound Power

This unit has a guaranteed sound power level of 105 dBA,
which includes an Uncertainty Value (K) of 1 dBA.

Sound power level was determined according to the
procedures outlined in ISO 11094.

Sound Pressure

This unit has a sound pressure level at the operator’s ear of 93
dBA, which includes an Uncertainty Value (K) of 1 dBA.

Sound power level was determined according to the
procedures outlined in EN 836.

Hand-Arm Vibration

Measured vibration level for left hand = 2.4 m/s2

Measured vibration level for right hand = 2.6 m/s2

Uncertainty Value (K) = 1.3 m/s2

Measured values were determined according to the procedures
outlined in EN 836.

Whole Body Vibration

Measured vibration level = 0.63 m/s2

Uncertainty Value (K) = 0.31 m/s2

Measured values were determined according to the procedures
outlined in EN 836 (Riding & Stand-Ons).

Model 74924

Sound Power

This unit has a guaranteed sound power level of 105 dBA,
which includes an Uncertainty Value (K) of 1 dBA.

Sound power level was determined according to the
procedures outlined in ISO 11094.

Sound Pressure

This unit has a sound pressure level at the operator’s ear of 93
dBA, which includes an Uncertainty Value (K) of 1 dBA.

Sound power level was determined according to the
procedures outlined in EN 836.

Hand-Arm Vibration

Measured vibration level for left hand = 3.1 m/s2

Measured vibration level for right hand = 2.7 m/s2

Uncertainty Value (K) = 1.5 m/s2

Measured values were determined according to the procedures
outlined in EN 836.

Whole Body Vibration

Measured vibration level = 0.71 m/s2

Uncertainty Value (K) = 0.35 m/s2

Measured values were determined according to the procedures
outlined in EN 836 (Riding & Stand-Ons).

Содержание 74920 TITAN ZX4820





























































Результаты поиска

Содержание 74920 TITAN ZX4820

Отзывы:

Бренды по названию

Популярные бренды

Toro 74920 TITAN ZX4820, Руководство оператора

Результаты поиска

Содержание 74920 TITAN ZX4820

Отзывы:

Бренды по названию

Популярные бренды