
Figure 29
1.
Bulb holder
4.
Slots
2.
Reflector
5.
Terminals
3.
Tab (2)
8. Push and rotate the bulb counterclockwise about
1/4 turn until it stops and remove the bulb from the
bulb holder (Figure 30).
Figure 30
1.
Bulb
3.
Bulb holder
2.
Metal pins
4.
Slots
Installing the Bulb
1. Align the metal pins on the base of the bulb with the
slots in the bulb holder and insert the base into the
holder (Figure 30).
2. Push and rotate the bulb clockwise until it stops.
3. Align the tabs on the bulb holder (Figure 30) with
the slots in the reflector.
4. Insert the bulb holder into the reflector and rotate it
1/4 turn clockwise until it stops.
5. Connect the wire connectors to the terminals on the
bulb holder.
Replacing the Fuse
The electrical system is protected by fuses. They are
located beneath the hood, near the fuel tank (Figure 31).
If a fuse goes out, check the circuit wiring for a short.
Figure 31
1.
Main/battery
3.
Full bag buzzer
2.
Interlock, electric clutch,
and cruise control
4.
Extra fuse
To replace a fuse, pull up to remove it from the socket.
Push down to insert it.
•
Main/ Battery—15 amp
•
Interlock, electric clutch, and cruise control—10
amp
•
Full bag buzzer—5 amp
Servicing the Battery
Always keep the battery clean and fully charged. Use
a paper towel to clean the battery and battery box. If
the battery terminals are corroded, clean them with a
solution of 4 parts water and 1 part baking soda. Apply
a light coating of grease to the battery terminals to
prevent them from corroding.
Battery voltage and amperage: 12 volts, 190 cold
cranking amps
27
Содержание 74582
Страница 38: ...Notes 38 ...