Toro 72144, Руководство пользователя программного обеспечения

Страница: 19 / 24

g030228
Figure 54
1. Engine Settings 4. Up arrow—Increase
2. Set Low Mow Speed 5. Enter
3. Engine speed in rpm (e.g.,
3,600 rpm) 6. Down arrow—Decrease
The system does not allow the following to occur:
•
The efficient speed cannot be set higher than the
maximum speed.
•
The low speed cannot be set higher than the
efficient speed.
Note:
You can set the maximum speed equal to the
efficient mow speed to use the efficient mode while
mowing.
You can enable mowing in high ground speed ( Figure
55 ).
g320843
Figure 55
1. Engine settings 4. Enable
2. High speed PTO 5. Disable
3. Enabled
Adjust the Fan Settings
These screens are used to adjust how often the fan
reverses (
Figure 56 ).
g320727
Figure 56
1. Fan settings 2. Adjust fan settings
To change the fan reversal time interval, press the
down arrow to decrease the minutes or pressing the
up arrow to increase the minutes (5 to 60 minutes).
After completing the change, press enter (
Figure 57 ).
g320728
Figure 57
1. Fan settings 3. 20 minutes (current fan
reversal interval)
2. Set the fan reversal time
interval
This screen allows you to monitor the outputs and
initiate a manual reversal.
Note:
The delay is converted to seconds as shown
in Figure 58 .
g320729
Figure 58
1. Fan settings 4. 000s fan reverse delay
2. Start fan reversal 5. Reverse (initiate fan
reversal cycle)
3. 000% fan speed command
19