Toro 60in Bagger Kit, Руководство оператора

Страница: 9 / 20

g203562
Figure 9
1. Draw bar decal
6. Install the bent, flared end of a rod into the keyed
slot in the left side of the machine frame, and
move the rod rearward to seat it in the frame
(
Figure 10 ).
Note:
Repeat this step for the right side of the
machine.
g203565
Figure 10
Left side shown
1. Pivot frame hole 4. Support rod
2. Washer 5. Keyed slot (existing)
3. Hairpin cotter 6. Bent, flared end of rod
7. Insert the bent ends of the rods into the
attachment mount as shown in
Figure 10 and
secure the end of each rod with a washer and
hairpin cotter.
4
Installing the Latch Rod
Parts needed for this procedure:
1 Latch rod
1 Hairpin cotter
Procedure
Install the latch rod with a hairpin cotter ( Figure 11 ).
g202360
Figure 11
1. Hairpin cotter 2. Latch rod
5
Assembling the Bagger Top
Parts needed for this procedure:
1 Bagger top
1 Bagger screen
Procedure
1. Turn the bagger top over.
2. Install the screen as shown in Figure 12 and that
it slopes down toward the collection bags.
9