Toro 51487A, Руководство оператора, Страница: 6 / 20

Installing the Auxiliary Handle
1. Position the auxiliary handle on the shaft of the trimmer with
the smooth surface facing the operator (
Figure 4 ).
G017277
1
2
3
Figure 4
1. Auxiliary handle 3. Brace
2. Latch
2. Slide the brace into the auxiliary handle so that the brace
rests in the groove along the shaft (
Figure 4 ).
3. Slide the latch from the left through the handle and brace
as shown, and tighten the latch screw with a Phillips
screwdriver (
Figure 4 ).
Installing the Guard
1. Remove the Phillips screw taped to the guard ( Figure 5 ).
2. Slide the guard onto the trimmer base as shown in Figure 5 .
G017622
Figure 5
1. Phillips screw 2. Guard
3. Secure the guard using a Phillips screw.
Installing the Edge Guard
Insert the ends of the wire edge guard into the holes in the trimmer
housing, as shown in
Figure 6 .
G017621
1
Figure 6
1. Wire edge guard
6