Toro 46452, Руководство оператора

Страница: 28 / 36

Installing Optional
Scarifying Knives
This machine is equipped with fraise knives but you
can also use it with scarifying knives for scarifying
the subsoil.
You can set the distance between the scarifying
knives at the following 4 positions:
•
25 mm (1 inch)
•
50 mm (2 inches)
•
75 mm (3 inches)
•
100 mm (4 inches)
In order to avoid imbalance, weights are used for the
spacing of 50 mm (2 inches), 75 mm (3 inches), and
100 mm (4 inches).
Use the tables below to select the spacing. The
letter
W in the tables indicates where the weights are
installed and the letter S indicates where the knives
are installed.
Note:
If there is no letter in the table cell, this
indicates that nothing is installed at that position.
Use the following graphic to locate the plate sections
(
Figure 37 ).
g348587
Figure 37
1. Plate section 1 5. Plate section 5
2. Plate section 2 6. Plate section 6
3. Plate section 3 7. Plate section 7
4. Plate section 4
Row 1 in each table is the closest row abutting the left
side plate at 30 mm (1.2 inches). Use this as the start
position (
Figure 38 and Figure 39 ).
g349254
Figure 38
1. Left side
g348517
Figure 39
1. Rows
28