installing an M6 washer and an M6 locknut onto the
appropriate M6 x 20 mm screw (Figure 7).
5.
Secure the other side of the regulator by installing an
M6 washer and an M6 locknut onto the other M6 x
20 mm screw (Figure 7).
6.
Connect the plug on the regulator to the appropriate
plug on the wireless-hour-meter wiring harness (Figure
8).
1
G025132
2
Figure 8
1.
Regulator plug
2.
Wireless-hour-meter
wiring-harness plug
7.
Install the wireless hour meter (Figure 9).
1
G025127
2
Figure 9
1.
Hour meter
2.
Seat pan
8.
Insert the connector of the wireless-hour-meter wiring
harness into the connector of the hour meter (Figure
10).
G025128
Figure 10
9.
Install the push mount in the hole in the underside of
the seat pan (Figure 11).
Note:
The push mount is attached to the
wireless-hour-meter wiring harness.
2
G025130
1
2
Figure 11
Regulator not shown
1.
Push mount
2.
Cable ties
10.
Use the cable ties to secure the wires to the seat-support
strut and the front of the seat pan (Figure 11).
11.
Lower and latch the seat.
4
