1
G025123
2
Figure 5
1.
Wireless-hour-meter
wiring harness
2.
Lighting-coil wires
9.
If the machine is equipped with a light kit, plug the
light-kit wiring harness into the appropriate connector
of the wireless-hour-meter wiring harness (Figure 2).
Installing the Regulator and
the Hour Meter
1.
If necessary, unlatch the seat and tip it forward.
2.
Insert 2 screws (M6 x 20 mm) with 2 washers (M6)
down through the holes in the top of the seat pan
(Figure 6).
1
G025124
2
Figure 6
1.
Screw (M6 x 20 mm), 2
2.
Washer (M6), 2
3.
On the underside of the seat pan, align the regulator
to the screws (Figure 7).
1
G025125
2
3
4
5
Figure 7
1.
Screw (2)
4.
Locknut (M6 x 12 mm), 2
2.
Grounding lead
5.
Regulator
3.
Washer (M6 x 12 mm), 2
4.
Align the grounding lead of the regulator over a
mounting slot, and secure the lead and the regulator by
3
