Toro 39514, Руководство оператора

Страница: 34 / 56

Changing the Engine Oil
Service Interval: After the first 5 hours
Every 100 hours (more often under severe
conditions.)
Note:
Dispose of the used oil at a recycling center.
1. Park the machine so that the drain side is slightly
lower than the opposite side to assure the oil
drains completely.
2. Shut off the engine, engage the parking brake,
remove the key, and wait for all moving parts to
stop before leaving the operating position.
3. Change the engine oil as shown in Figure 37 .
Note:
Torque drain plug to 18 N∙m (13 ft-lb).
g249685
Figure 37
4. Slowly pour approximately 80% of the specified
oil into the filler tube, and slowly add the
additional oil to bring it to the
Full mark ( Figure
38 ).
g249684
Figure 38
5. Start the engine and drive to a flat area.
6. Check the engine-oil level.
34