Toro 38682, Руководство оператора

Страница: 9 / 40

106-2737
1. Park 3. Neutral 5. Engine—run
2. Drive 4. Engine—stop 6. Warning—wear ear protection.
Product Overview
Figure 3
1. Side discharge 5. Controls
2. Mower deck 6. Handle
3. Recoil starter 7. Caster wheel
4. Gas tank
Controls
Become familiar with all the controls (Figure 4) before
you start the engine and operate the machine.
Figure 4
1. Throttle control 6. Drive lever
2. Ignition switch 7. Gear shift lever
3. Neutral/parking brake lock 8. Choke
4. Operator Presence
Control (OPC) lever 9. Power take off lever (PTO)
5. Handle
Throttle Control
The throttle control has two positions: Fast and Slow .
Operator Presence Control (OPC)
Levers
When you squeeze the OPC levers against the handles,
the OPC system senses that the operator is in the normal
operating position. When you release the OPC levers,
the OPC system senses that the operator has left the
normal operating position, and the system will stop the
engine if either the gear shift lever is not in the
neutral
position or the blade control (PTO) lever is engaged.
9