If you leave the snowthrower plugged into a
power outlet, someone can inadvertently start
the snowthrower and injure people or damage
property (model 38582 only).
Unplug the power cord whenever you are not
starting the snowthrower.
Engaging the Rotor Blades
To engage the rotor blades, hold the control bar against
the handle (Figure 15).
Figure 15
1.
Control bar
Disengaging the Rotor Blades
To disengage the rotor blades, release the control bar
(Figure 16).
Figure 16
Stopping the Engine
To stop the engine, turn the ignition key
counterclockwise to the Off position (Figure 17).
Figure 17
Adjusting the Discharge Chute
and Chute Deflector
To adjust the discharge chute, move the chute handle
as shown (Figure 18).
Figure 18
To raise or lower the angle of the chute deflector, press
the trigger on the chute deflector and move the chute
deflector up or down (Figure 19).
Figure 19
1.
Chute deflector trigger
2.
Chute deflector
9
