Toro 38567, Руководство оператора

Страница: 7 / 24

2
Installing the Discharge Chute
Parts needed for this procedure:
3 Screws
1 Chute assembly
Procedure
Install the discharge chute as shown (Figure 7).
Figure 7
1. Discharge chute
2. Screw (3)
Note:
For easier installation, use a small ratchet wrench
to tighten the screws.
Important:
Do not overtighten the screws;
otherwise you may damage the discharge chute and
prevent it from turning freely.
3
Filling the Engine with Oil
No Parts Required
Procedure
Your machine does not come with oil in the engine, but
it does come with a bottle of oil.
Important:
Before starting the engine, fill the
engine with oil.
Note:
The bottle of oil may contain more than is
required. Do not overfill the engine.
Max fill: 20 oz. (0.6 l), type: automotive detergent oil
with an API service classification of SJ, SL, or higher.
Use Figure 8 below to select the best oil viscosity for the
outdoor temperature range expected:
Figure 8
1. Using SAE 30 at outdoor
temperatures below 40°F
(4°C) will result in hard
starting. 2. Using 10W-30 at outdoor
temperatures above
80°F (27°C) may result in
increased oil consumption;
therefore, check the oil
level more frequently in
these circumstances.
Note:
0W30 synthetic oil is acceptable for use in cold
temperatures.
1. Move the machine to a level surface.
2. Clean around the oil fill cap (Figure 9).
Figure 9
1. Oil fill cap
3. Unscrew the oil fill cap and remove it.
7