background image

If a shield, safety device, or decal is damaged, illegible,
or lost, repair or replace it before beginning operation.
Also, tighten any loose fasteners.

Do not

use the snowthrower on a roof.

Perform only those maintenance instructions described
in this manual. Before performing any maintenance,
service, or adjustment, stop the motor and disconnect
the cord. If major repairs are ever needed, contact an
Authorized Service Dealer.

Purchase only genuine Toro replacement parts and
accessories.

Sound Pressure

This unit has a maximum sound pressure level at the
operator’s ear of 82 dBA, based on measurements of
identical machines per ISO 11201.

Sound Power

This unit has a guaranteed sound power level of 96 dBA,
based on measurements of identical machines per EN 3744.

Vibration

This unit does not exceed a hand/arm vibration level of
5.79 m/s2, based on measurements of identical machines
per EN 1033.

Waste of Electrical/Electronic Equipment (WEEE)

• EU directive 2002/96/EC classies this product as an electrical or electronic tool.

Do Not

dispose of this tool as unsorted municipal waste.

• Dispose of this tool at a collection or recycling center according to local and national law.
• The consumer has an important role in reducing the disposal of waste by returning waste

electronic/electrical tools for recycling.
• Recycling avoids the dispersion of hazardous materials into the municipal waste stream.
• The crossed-out bin symbol reminds the user not to dispose of this product as unsorted municipal waste.

3

Содержание 38365













Отзывы: