Toro 33513, Руководство оператора

Страница: 14 / 24

Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 25 hours
• Change the engine oil.
Before each use or daily
• Check the engine-oil level.
• Clean debris from the machine.
• Inspect the air-cleaner elements.
• Check the belt tension. If the engine is working but the flails seem underpowered,
check the belt tension
• Check the flail blades for wear or damage.
• Check for loose fasteners.
Every 50 hours
• Clean the air-filter elements. Clean them more frequently in dusty operating
conditions.
Every 100 hours
• Change the engine oil.
• Clean the sediment cup.
• Inspect, clean, and adjust the spark plug; replace it if necessary.
Every 200 hours
• Replace the spark plug.
Every 300 hours
• Replace the paper air-cleaner element. Replace it more frequently in dusty
operating conditions.
Yearly or before storage
• Touch up chipped paint.
Premaintenance
Procedures
Disconnecting the Spark-Plug
Wire
Before performing any maintenance on the engine, belts, or
cutting blades, disconnect the spark-plug wire from the spark
plug (
Figure 13 ).
G019426
Figure 13
1. Spark-plug wire
14