Toro 322006065 Скачать руководство пользователя страница 3

Contents

Safety ....................................................................... 3

General Safety ................................................... 3
Safety and Instructional Decals .......................... 4

Setup ........................................................................ 5

1 Raising the Handle .......................................... 5
2 Installing the Discharge Chute ......................... 6
3 Adding Oil to the Engine................................... 6

Product Overview ..................................................... 7

Specifications .................................................... 7

Before Operation ................................................... 8

Before Operation Safety ..................................... 8
Adding Fuel ........................................................ 8
Adjusting the Handle Height and Angle ............... 9
Performing Daily Maintenance............................ 9
Adjusting the Height of Cut ................................. 9

During Operation ................................................. 10

During Operation Safety ................................... 10
Starting the Engine ........................................... 10
Engaging the Mower Head ................................11
Shutting Off the Engine......................................11
Operating Tips ..................................................11

After Operation .....................................................11

After Operation Safety .......................................11

Maintenance ........................................................... 12

Maintenance Safety.......................................... 12

Recommended Maintenance Schedule(s) ........... 12
Pre-Maintenance Procedures .............................. 13

Preparing for Maintenance ............................... 13

Engine Maintenance ........................................... 13

Servicing the Air Filter....................................... 13
Changing the Engine Oil ................................... 14
Servicing the Spark Plug................................... 15

Drive System Maintenance .................................. 16

Removing and Installing the Wheels ................. 16
Replacing the Drive Belt ................................... 16
Adjusting the Drive Belt Tension........................ 17

Mower Maintenance............................................. 18

Replacing the Mower Line ................................ 18

Cleaning .............................................................. 19

Removing Debris from the Machine .................. 19

Storage ................................................................... 20

Storage Safety.................................................. 20
Storing the Machine.......................................... 20

Troubleshooting ...................................................... 21

Safety

This machine has been designed in accordance with
EN 14910:2007+A1:2009.

General Safety

This product is capable of throwing objects. Always
follow all safety instructions to avoid serious personal
injury.

Read, understand, and follow the instructions
and warnings in this

Operator’s Manual

and on

the machine and attachments before starting the
engine.

Do not put your hands or feet near moving parts
or under the machine.

Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.

Keep bystanders and children out of the operating
area. Do not allow children to operate the
machine. Local regulations may restrict the
age of the operator. Allow only people who are
responsible, trained, familiar with the instructions,
and physically capable to operate the machine.

Stop the machine, shut off the engine, and wait for
all moving parts to stop before servicing, fueling,
or unclogging the machine.

Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol

, which

means Caution, Warning, or Danger—personal
safety instruction. Failure to comply with these
instructions may result in personal injury.

3

 

Содержание 322006065

























Отзывы: