Toro 31974, Руководство оператора, Страница: 17 / 28

g299646
Figure 17
1. Gearbox 3. PTO driveshaft
2. Bolts and nuts
Removing the Cutting Unit
from the Traction Unit
1. Park the machine on a level surface with the
cutting unit raised.
2. Remove the height-of-cut pins ( Figure 18 ) from
the cutting-unit side plates.
g296784
Figure 18
1. Height-of-cut chain
2. Pin
3. Lower the cutting unit, engage the parking
brake, shut off the engine, and remove the key.
4. Remove the bolts and washers that secure the
lift arms to the castor arms.
g296375
Figure 19
1. Lift arm 3. Washer
2. Castor arm 4. Bolt
5. Remove the bolts and nuts from the PTO shaft
(
Figure 20 ) and slide the yoke out of the gearbox.
g299646
Figure 20
1. Gearbox 3. Bolts and nuts
2. PTO shaft
DANGER
If the engine is started and the PTO shaft
is allowed to rotate, serious injury could
result.
Do not start the engine and engage the
PTO lever when the PTO shaft is not
connected to the gearbox on the cutting
unit.
17