Toro 31950, Руководство по установке

Страница: 6 / 8

5
Routing and Connecting
the Wire Harness
Parts needed for this procedure:
4 Cable ties
Routing and Connecting the
Harness at the Axle-Frame Tube
1. Route the 7-contact connector of the wire
harness along the right frame tube as shown in
Figure 9 .
g280324
Figure 9
1. Electrical
connectors—
TAIL LIGHT
(
RIGHT
) and
TAIL LIGHT
(
LEFT
) (wire harness)
2. 7-contact connector (wire
harness)
2. At the forward side of the axle-frame tube, plug
the 4-pin connector of the left taillight harness
(
Figure 10 ) into the 4-socket connector of the
wire harness labeled
TAIL LIGHT
(
LEFT
).
g280316
Figure 10
1. Holes—axle-frame tube 6
mm (1/4 inch) 5. Push-in fastener (harness)
2. Wire harness 6. 4-socket connector—wire
harness
TAIL LIGHT
(
LEFT
)
3. 4-pin connector (right
taillight harness) 7. 4-pin connector (left
taillight harness)
4. 4-socket connector—wire
harness
TAIL LIGHT
(
RIGHT
)
3. Plug the 4-pin connector of the right taillight
harness (
Figure 10 ) into the 4-socket connector
of the wire harness labeled
TAIL LIGHT
(
RIGHT
).
4. At the 4-socket connectors labeled
TAIL LIGHT
(
LEFT
) and
TAIL LIGHT
(
LEFT
), insert the harness
push-in fasteners into the 2 holes 6 mm (1/4
inch) in the front of the axle-frame tube (
Figure
10 ).
6