Toro 31950, Руководство по установке

Страница: 5 / 8

Installing the Rear Wire Harness
Bracket
1. Remove the 2 flange locknuts (1/2 inch), 2
capscrews (1/2 x 4-1/2 inches), and 2 washers
(1/2 inch) that secure the hitch tube to the
receiver (
Figure 7 ).
g280312
Figure 7
1. Capscrew (1/2 x 4-1/2
inches) 4. Flange locknut (1/2 inch)
2. Washer (1/2 inch) 5. Harness bracket
3. Receiver tube
2. Align the holes in the harness bracket with the
holes in the receiver as shown in
Figure 7 .
3. Assemble the harness bracket to the clevis
with the 2 capscrews, 2 washers, and 2 flange
locknuts that you removed in step
1 .
4. Torque the locknuts and capscrews to 67 to 83
N∙m (91 to 113 ft-lb).
g280309
Figure 8
5