Toro 315000001, Руководство оператора

Страница: 7 / 32

Figure 3
1. Fresh water tank 3. Flanged head bolts
2. Mounting bracket
3. Remove the tank from the machine ( Figure 3 ).
Note:
Retain the fresh water tank and flanged head
bolts for installation in Installing the Fresh Water Tank
(page 10) .
Installing the Hardware for the Rinse
Tank Straps and Spray Gun Bracket
1. Assemble the 2 clamps to the spray-gun bracket ( Figure
4 ) with 2 carriage bolt (5/16 x 1 inch) and 2 flanged
locknuts (5/16 inch).
Figure 4
1. Carriage bolt (5/16 x 1
inch) 3. Clamp
2. Spray-gun bracket 4. Flanged locknut (5/16
inch)
2. Remove and retain the bolt (3/8 x 5 inch), washers, and
flanged locknut that secure the front tank straps at the
top of the tank (
Figure 5 ).
Note:
Retain the bolt (3/8 x 5 inch), washers, and
flanged locknut; discard the short carriage bolt and
locknut holding the R-clamp in place.
Figure 5
1. Locknut 5. Washer
2. R-clamp 6. Flanged locknut
3. Carriage bolt (short) 7. Right, front tank strap
4. Bolt (3/8 x 5 inch)
3. Install a carriage bolt (3/8 x 1 inch) in the upper-inboard
holes of the left, front tank strap (
Figure 6 ).
Note:
Loosely thread a flanged locknuts (3/8 inch)
onto the carriage bolt.
Figure 6
1. Flanged locknuts (3/8
inch) 3. Carriage bolts (3/8 x 1-1/4
inch)
2. Carriage bolt (3/8 x 1 inch)
7