Toro 31213, Руководство пользователя

Страница: 5 / 16

g033910
Figure 4
1. Mower deck 4. Template location on
mower deck
2. Drill the 4 holes (13/32
inch) here. 5. Nuts
3. Template with the number
72 in it 6. Carriage bolt
5. Install the new blower hinge with 4 bolts (3/8 x 1
inch) and 4 locknuts (3/8 inch) using the drilled
holes (
Figure 5 ).
g033908
Figure 5
1. Mower deck 4. Blower hinge
2. Bolt (3/8 x 1 inch) 5. Drilled holes
3. Locknut (3/8 inch)
Model 31213
1. Install the metal template to the mower deck
with the previously removed carriage bolts and
nuts using the existing holes in the mower deck
(
Figure 6 ).
Note:
Make sure that the carriage bolts and
nuts are tight and that the template is tight
against the mower deck.
2. Center punch the new mower deck hole
locations using the 3 holes in the template
(
Figure 6 ).
3. Remove the metal template and drill 3 pilot holes
(1/8 inch) with a sharp drill bit (
Figure 6 ).
4. Drill 3 holes (13/32 inch) holes into the pilot
holes with a sharp drill bit (
Figure 6 ).
g011122
Figure 6
1. Mower deck 4. Template location on
mower deck
2. Drill 3 pilot holes (1/8 inch)
here. 5. Nut
3. Template with the number
60 in it 6. Carriage bolt
5. Install the new blower hinge with 3 bolts (3/8 x 1
inch) and 3 locknuts (3/8 inch) using the drilled
holes (
Figure 7 ).
6. Install the anti-scalp roller to the blower hinge
with the previously removed axle bolt (3/8 x
4-1/2 inches), spacer, bushing, and flange nut
(3/8 inch); refer to
Figure 7 .
5