Toro 31200, Руководство оператора

Страница: 36 / 68

6. Engage the parking brake.
7. Set the throttle to the low I
DLE
position.
Performing a Parked Regeneration
Note:
For instructions on unlocking protected menus,
refer to Accessing Protected Menus (page 18) .
1. Access the protected menu and unlock the
protected settings submenu (
Figure 37 ); refer to
Accessing Protected Menus (page 18) .
g028523
Figure 37
2. Navigate to the M
AIN
M
ENU
, press the center
button to scroll down to the S
ERVICE
M
ENU
, and
press the right button to select the S
ERVICE
option ( Figure 38 ).
Note:
The InfoCenter should display the PIN
indicator in the upper right corner of the display.
g212371
Figure 38
3. In the S
ERVICE
M
ENU
, press the middle button
until the DPF R
EGENERATION
options displays,
and press the right button to select the DPF
R
EGENERATION
option ( Figure 39 ).
g212138
Figure 39
4. When the “Initiate DPF Regen. Are you sure?”
message displays, press the center button
(
Figure 40 ).
g212125
Figure 40
5. If the coolant temperature is below 60°C (140°F)
the “Insure is running and above 60C/140F”
message displays. ( Figure 41 ).
Observe the temperature in the display, and run
the machine at full throttle until the temperature
reaches 60°C (140°F), then press the center
button.
Note:
If the coolant temperature is above 60°C
(140°F) this screen is skipped.
36