background image

2

All Rights Reserved

Printed in the USA

 2002, 2003 by The Toro Company

8111 Lyndale Avenue South
Bloomington, MN  55420-1196

Contents

Page

Introduction

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Safety

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Before Operating

2

. . . . . . . . . . . . . . . . . . . . . . . . . 

While Operating

3

. . . . . . . . . . . . . . . . . . . . . . . . . . 

Maintenance

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Sound Pressure Level

4

. . . . . . . . . . . . . . . . . . . . . . 

Sound Power Level

4

. . . . . . . . . . . . . . . . . . . . . . . 

Vibration Level

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . 

Safety and Instruction Decals

5

. . . . . . . . . . . . . . . . 

Specifications

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

General Specifications 

7

. . . . . . . . . . . . . . . . . . . . . 

Optional Equipment

7

. . . . . . . . . . . . . . . . . . . . . . . 

Setup

8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installing the Castor Wheel Assemblies

8

. . . . . . . . 

Installing the Stand

9

. . . . . . . . . . . . . . . . . . . . . . . . 

Installing the Traction Unit to the Blower

9

. . . . . . 

Installing the Drive Shaft

10

. . . . . . . . . . . . . . . . . . . 

Rear Ballast

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Greasing the Blower

10

. . . . . . . . . . . . . . . . . . . . . . . 

Operation

11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Operating Tips

11

. . . . . . . . . . . . . . . . . . . . . . . . . . . 

Transporting the Blower

11

. . . . . . . . . . . . . . . . . . . . 

Adjusting the Discharge Opening

11

. . . . . . . . . . . . . 

Maintenance

12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Lubrication

12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Adjusting the Blower Belt

13

. . . . . . . . . . . . . . . . . . 

Troubleshooting

14

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Storage

15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

The Toro General Commercial Products Warranty

16

. . 

Introduction

Read this manual carefully to learn how to operate and
maintain your product properly. The information in this
manual can help you and others avoid injury and product
damage. Although Toro designs and produces safe
products, you are responsible for operating the product
properly and safely.

Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model and
serial numbers of your product ready. The two numbers are
stamped on a plate which is located on the housing.

Write the product model and serial numbers in the space
below:

Model No.

Serial No.

This manual identifies potential hazards and has special
safety messages that help you and others avoid personal
injury and even death. DangerWarning, and Caution are
signal words used to identify the level of hazard. However,
regardless of the hazard, be extremely careful.

Danger signals an extreme hazard that will cause serious
injury or death if you do not follow the recommended
precautions.

Warning signals a hazard that may cause serious injury or
death if you do not follow the recommended precautions.

Caution signals a hazard that may cause minor or moderate
injury if you do not follow the recommended precautions.

This manual uses two other words to highlight information.

Important

 calls attention to special mechanical

information and Note: emphasizes general information
worthy of special attention.

Safety

Hazard control and accident prevention are dependent
upon the awareness, concern, and proper training of the
personnel involved in the operation, transport,
maintenance, and storage of the machine. Improper use
or maintenance of the machine can result in injury or
death. To reduce the potential for injury or death,
comply with the following safety instructions.

Before Operating

Read and understand the contents of this Operator’s
Manual before operating the machine. Become familiar
with all of the controls and know how to stop quickly. A
free replacement manual is available by sending the
complete Model and Serial Number to The Toro
Company, 8111 Lyndale Avenue South, Bloomington,
Minnesota 55420-1196.

Never allow children to operate the machine. Do not
allow adults to operate machine without proper
instruction. Only trained operators who have read this
manual should operate this machine.

Never operate the machine when under the influence of
drugs or alcohol.

Keep all bystanders away from the operating area.

Содержание 30855

















Отзывы: