Toro 30799, Руководство оператора, Страница: 14 / 24

14
Rear Castor Wheels
Figure 19
1. Remove hairpin cotter and cotter pin securing rear
castor pivot arm to deck bracket.
1
Figure 20
1. Rear castor pivot
2. Align the pivot arm holes with selected height-of-cut
bracket holes in the deck frame, install cotter pin and
secure with hairpin cotter.
Rear Deck Chain
1. Remove hair pin cotter and clevis pin securing
height-of-cut chain to chamber bracket.
2. Mount height-of-cut chain to desired height-of-cut hole
with clevis pin and hair pin cotter.
1
Figure 21
1. H.O.C chain
Figure 22
Check Tire Pressure
Ensure that the air pressure in the front and rear castor
wheels is 40 psi (276 kPa).
Important Maintain even pressure in all tires to ensure
a good quality-of-cut and proper machine performance. Do
not under-inflate.