Toro 30403, Руководство оператора

Страница: 12 / 28

g008866
Figure 7
1. Tensioning cap 4. Axle mounting holes
2. Spacers 5. Castor wheel
3. Shims
decal100-5622
Figure 8
4. Push the castor spindle through the castor
arm. Install the shims (as they were originally
installed) and the remaining spacers onto the
spindle shaft. Install the tensioning cap to
secure the assembly.
5. Remove the hairpin and clevis pin securing the
height of cut collar to the height of cut rod on the
rear of the cutting unit (
Figure 9 ).
g012231
Figure 9
1. Height-of-cut rod 3. Clevis pin and hairpin
cotter
2. Height-of-cut collar
6. Align the height-of-cut collar to the desired
height-of-cut holes on the height-of-cut rod
(
Figure 10 ).
decal108-1986
Figure 10
7. Secure the adjustment with the clevis pin and
hairpin.
Note:
Position the head of the clevis pin toward
the front of the deck, if possible.
Note:
When using 25 mm (1 inch), 38 mm
(1-1/2 inch), or occasionally 51 mm (2 inch)
height-of-cut, move the skids and roller to the
highest holes.
12